LPC-P2124
FEATURES: • MCU: LPC2124 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation • standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG • three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current • single power supply: +7-9VDC required • power supply status LED • power supply filtering capacitor • two channel RS232 interface with two RS232 SUB-D 9 pin connectors • iButton interface circuit • Frequency input connector • two buttons • two status LEDs • Potentiometer connected to AIN • RESET circuit with exterman control of Philips ISP utility via RS232 • RESET button • DBG jumper for JTAG enable • BSL jumper for bootloader enable • JRST jumper for enable/disable external RESET vontrol by RS232 • 14.7456 Mhz crystal allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock) • extension headers for all uC ports • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print • Dimensions: 115x80 mm (4.5x3.2")
